The Bidirectional DC power supply with integrated, regenerative electronic load series EA-PSB 9000 and 10000 provides 15kW in 3U or 30kW in 4U chassis with up to 2000 VDC. This series easily parallels supplies for almost 1.92MW of power. All EA Elektro-Automatik DC power supplies and loads feature true autoranging and thus over additional operating ranges.
The lower the test voltage, the higher currents are possible. Likewise, higher voltages are available for lower currents. This means that a much wider range of test routines can be covered with a bidirectional DC power supply.

The PSB series of bidirectional DC power supply features 5″ TFT touch panel display for intuitive control, setup and programming. The intelligent interface allows you to configure and test quickly without the need for extensive manual review.

EA bidirectional dc power supplies come standard with an arbitrary waveform function generator, swappable digital interface control and built-in test routines for battery test, photovoltaic simulation and MPP tracking, to name a few.

The programmable DC power supply family from EA range in power from 80W benchtop devices up to 30kW in a single chassis. High power density units can be easily paralleled up to 1,92MW in output, with up to 2000 VDC. All EA Elektro-Automatik DC programmable power supplies feature true Autoranging which automatically offers increased current at lower voltages, enabling a single supply to meet wider test requirements.

The PS and PSI series feature 5 “TFT touch panel display for intuitive control, setup and programming. The intelligent interface allows you to program and test quickly without the need for extensive manual review. This user-friendly touchscreen is a feature not found on competing benchtop supplies.

Most of the PS / I family of programmable dc power supplies come standard with an arbitrary waveform function generator, swappable digital interface control and built-in test routines for battery test, photovoltaic simulation and MPP tracking, to name a few.

Available in conventional and regenerative, DC electronic loads from EA Elektro-Automatik boast high power density and premium features not found on typical loads. Offering input power ratings up to 15kW in 3U or 30kW in 4U chassis with max 2000 VDC. Easily parallel operation for almost 1.92MW of power. Regenerative ELRs reduce heat, noise and HVAC costs. All of EA’s DC power supplies and DC electronic loads feature true Autoranging which automatically offers increased current at lower voltages. EA’s loads come in desktop, tower-style or 19 “rack-mount.

The EL / R series features 5 “TFT touch panel display for intuitive control, setup and programming. The intelligent interface allows you to configure test routines and program the unit quickly without the need for extensive manual review.

DC electronic loads come standard with an arbitrary waveform function generator, swappable digital interface control and built-in test routines for battery test, photovoltaic simulation and MPP tracking, to name a few.

EA’s flexible high-power DC supplies and electronic loads are integrated into 19 ” rack power supply or closed cabinet solutions and can be cost-effectively adapted to a wide variety of user requirements, thanks to their modular design and the standardized power and protection modules employed.

The 19 “rack power supply or cabinet system can be designed as pure DC sources, with power supplies, or as pure sinks, with electronic loads. Further still, the EA power supplies can be conventional or bidirectional, and the loads can be conventional or regenerative for a mixed of source and sink capability. High power density units can be easily paralleled up to 1.92MW in output, with up to 2000 VDC.

The DC rack power supply and electronic load series each feature 5 “TFT touch panel display for intuitive control, setup and programming. The intelligent interface allows you to program and test quickly without the need for extensive manual review.